ASPAR selects, manufactures and installs vertical and inclined platforms for people with disabilities and other people with reduced mobility at properties in Ivano-Frankivsk. Platform type is determined by the user route, level difference, stair geometry, landing zones and available space. Photos or a plan, key dimensions and a short task description are sufficient for an initial assessment.
Discuss a solution for the property
When a lift platform should be considered in the design
For new construction or refurbishment, the solution should be checked before openings, stairs, enclosures and power points are fixed. ASPAR provides technical data for its own equipment and coordinates its integration within the supply scope. This is not a separate external drawing-bureau service.
- The architect supplies a plan, section and level difference.
- The owner describes the user route and access arrangements.
- The contractor confirms site readiness and the boundaries of related work.
The practical preparation process is explained in the guide on planning accessibility at the drawing stage and on the page for architects and building designers.
Vertical or inclined platform
A vertical platform is assessed where a separate path between levels and suitable landing zones can be provided. An inclined platform follows the stairs, so actual flight dimensions, turns and clear passage are required. An overview is available in the accessibility equipment section.
What to send ASPAR
- Photos of the full route from the lower to the upper point.
- A plan or sketch with the level difference and clear dimensions.
- Platform entry and exit directions.
- Whether the installation is indoors or outdoors.
- Available power and the readiness of adjoining structures.
From technical assessment to installation
After reviewing the data, ASPAR identifies a suitable equipment type and agrees the configuration and work scope. Installation and commissioning are completed for the agreed solution. Power supply and building readiness are agreed separately for the property.
Evidence and claim boundaries
This page does not claim a completed ASPAR project in Ivano-Frankivsk until verified Owner materials are available. Information about equipment certification and regulatory context is used only within its verified scope. Equipment certification does not automatically establish that the entire property complies.
Questions before contacting ASPAR
Can a model be selected from lift height alone?
No. The route, landing zones, available space, entry direction and installation conditions are also needed.
What drawings does ASPAR provide?
Technical information related to its own equipment and the agreed integration. ASPAR is not positioned as an external drawing bureau for third-party systems.
Does ASPAR have a branch in Ivano-Frankivsk?
This page describes work with properties in the city. It does not claim a local office, warehouse or permanent crew.