Solution at a glance
ASPAR selects and manufactures lift platforms for people with disabilities and other people with reduced mobility for properties in Cherkasy. Selection starts with the route rather than a model: how the user approaches the building, the level difference to overcome, the space available near the stairs and possible landing zones. Photos, key dimensions and a plan, if available, are enough for an initial assessment.
When an existing entrance needs adaptation
For an apartment building, medical office, shop or public premises, the entire accessible section of the route must be assessed rather than the platform alone. This includes the approach, doorway, lower and upper landing zones, platform use and onward movement inside the building.
For an apartment building, the responsibilities of the condominium association or manager, designer and installation contractor should be separated early. This process is explained in more detail in the solutions for residential developments and condominium associations.
Vertical or inclined platform
A vertical platform is assessed when a separate lift path and adequate landing zones can be provided between levels. An inclined platform travels along the stairs, so stair geometry, turns, clear passage width and the space occupied by the folded platform are critical.
Neither type is universally better. The appropriate direction depends on the actual site constraints, intended pattern of use and route requirements.
What to send for a technical assessment
- The type of property and exact route section where lifting is required.
- Photos of the entrance or stairs showing the overall setting and landing zones.
- The level difference and available dimensions.
- A plan, section or sketch, if available.
- The intended boarding and exit directions.
- Information about the installation location and available power supply, if already known.
Architects and designers can use the practical guide to planning accessibility. It helps define the project inputs but does not replace an assessment of the specific property.
From selection to installation
- ASPAR clarifies the task and reviews the supplied materials.
- An engineer identifies a suitable equipment type and any issues that still need resolution.
- A calculation is prepared once the configuration is agreed.
- Site readiness is checked before installation and commissioning.
Repair, maintenance and modernization of lifting equipment are available throughout Ukraine. Travel, scope, logistics, timing and price are defined for the specific equipment and property. This capability does not imply an ASPAR office or permanent local service crew in Cherkasy.
Technical and regulatory limits
The relevant product families are grouped in the accessibility equipment category. Certification information and the limits of regulatory statements are set out in a separate verified guide. Equipment certification does not automatically confirm compliance of the entire property.
Questions before contacting ASPAR
Can the task be assessed from photos alone?
Photos help establish an initial direction and the questions that remain. Exact dimensions, a plan or an additional survey may be required for the final solution.
Does the customer need to choose a model?
No. It is better to describe the route and site constraints, then agree the model and configuration after technical assessment.
What determines the calculation?
The platform type, level difference, geometry, landing zones, configuration, installation conditions and agreed scope of work. No numerical price is stated without a defined configuration.