|
Quantity
|
Total
|
||
|
|
|||
A vertical platform lift helps overcome a change in level on a straight vertical path. ASPAR selects the configuration around the entrance or internal-space geometry, entry directions, height, installation conditions and user scenario. An initial assessment requires photographs, a plan and dimensions of the proposed installation area.
When to consider a vertical platform lift
This solution is considered when space is available beside the change in level and safe entry can be arranged at the lower and upper landings. It may be used at an entrance, inside a building or in another area when the selected configuration matches the site conditions.
If the route must follow a flight of stairs, compare inclined platform lifts.
Configuration questions to resolve
| Question | Why it matters |
|---|---|
| What is the height between levels | To select the structural solution |
| What are the entry and exit directions | To plan the platform and guarding |
| Where will the equipment be installed | To account for indoor or outdoor conditions |
| How much space is available | To check dimensions and building preparation |
| What power supply is available | To coordinate the electrical system |
| Who will use the lift and how | To define controls and the operating scenario |
Numerical parameters must come from the approved technical documentation for the selected configuration, not from a universal SEO range.
Verified parameters for selected models
| Model | Load capacity | Travel height | Drive | Power supply / stops |
|---|---|---|---|---|
| EMT 1000 | 200 kg | up to 1 m | rope, electromechanical | 220 V |
| EMT 2000 | 200 kg | up to 2 m | rope, electromechanical | 220 V |
| EMS 2000 | 250 kg | up to 2 m | chain, electromechanical | 220 V / 380 V |
| EMS 3000 | 250 kg | up to 3 m | chain, electromechanical | 220 V / 380 V |
| HM 2000 | 250 kg | up to 2 m | hydraulic | 220 V / 380 V |
| HM 3000 | 250-300 kg | up to 3 m | hydraulic | 220 V / 380 V; 2 stops, optional up to 3 |
The parameters apply to the named models and configurations. The certificate supports the product category but does not list ASPAR commercial model codes.
Information needed for a quotation
Send photographs or a drawing, height, area dimensions, entry directions, installation conditions and available power supply. If there is no completed project design, an engineer will prepare a clarification checklist.
Certification
ASPAR vertical lifting platforms for persons with disabilities are certified within the product-type scope and validity of certificate UA.PN.191.3945-25, valid until 27 October 2026.
This is category-level product certification. The certificate does not list commercial model codes. Equipment certification does not establish compliance of the entire building with Ukrainian DBN requirements. Review the document scope.
What affects the price
Price depends on height, platform, entry directions, drive, guarding, gates, material execution, building preparation, delivery and installation. The final amount is determined once the configuration is agreed.
A real project
For an entrance in Kyiv, ASPAR delivered a hydraulic lift together with a folding ramp. View the completed solution.
Frequently asked questions
Is a shaft required?
The need for a shaft or guarding depends on the configuration and site conditions. It is determined after the installation area has been reviewed.
Can the platform be installed outdoors?
Outdoor installation is confirmed for the specific execution, controls, materials and protection measures.
What should I send for the first consultation?
Send photographs, a plan, the height difference, approximate dimensions of the available area and a description of the user route.
Request a quotation
Send the site parameters. ASPAR will help assess whether a vertical solution is suitable and will prepare a quotation once the configuration is clear.