Solution at a glance
ASPAR selects, manufactures and installs vertical and inclined platforms for people with disabilities and other people with reduced mobility at properties in Sumy. Platform type is determined by the user route, level difference, stair geometry, landing zones and available space. Photos or a plan, key dimensions and a short task description are sufficient for an initial assessment.
Medical and rehabilitation route
In a hospital or rehabilitation centre, the stairs alone are not enough. The user's approach, space for an assistant, landing zones, doors, turns and onward movement inside the building all matter. The platform must solve a defined level difference while accounting for the user route, landing zones and building conditions.
Additional context is available on the hospital solutions and rehabilitation centre solutions pages.
When to assess an inclined platform
If the accessible route follows existing stairs, assess an inclined platform. Photos of the entire flight, width, turns, lower and upper points, and the space occupied when folded are required. If a separate lift path can be provided between levels, assess a vertical platform.
What to send for assessment
- The type of institution and route section.
- Photos of the approach, stairs, doors and landing zones.
- The level difference and clear dimensions.
- Whether the user needs assistance during boarding.
- A plan or sketch if available.
- Installation conditions and power information.
From selection to ready equipment
ASPAR reviews the inputs, compares solutions in the accessibility equipment category, and prepares a configuration and commercial proposal. Once agreed, the equipment is manufactured and installed and commissioned. Timing, logistics and exact scope are defined for the property.
Existing equipment
ASPAR repairs, maintains and modernizes lifting equipment throughout Ukraine. For a property in Sumy, the equipment must first be identified and the fault or task described, supported by component photos and available documents. Travel feasibility, scope, timing and price are confirmed separately.
FAQ
Is an exact model needed at the first stage?
No. Start with the task, route and dimensions. The model or configuration is determined after technical review.
Can parameters from another property's tender specification be reused?
Not as a ready solution. Parameters from another property do not replace data for your route.
Does ASPAR have a permanent service crew in Sumy?
This page does not make that claim. ASPAR works throughout Ukraine, while service conditions are defined for the specific equipment and property.
Review the selection criteria or Discuss a solution for a property in Sumy.