Accessibility lift platforms in Kyiv

A vertical platform travels directly between levels and needs suitable landing zones. An inclined platform follows a flight of stairs, so stair geometry, travel path and clear passage must be checked. If a standard configuration cannot solve the task, ASPAR can assess a custom solution within its verified engineering scope.

Start by comparing accessibility lifting equipment, vertical lift platforms and inclined stair platforms. Model-specific parameters must come from the relevant product page or an agreed proposal, not from another project.

An entrance solution is often coordinated by the owner or facility manager, architect, contractor and future installation team. The lower and upper landings, user approach, door swing, clear space in front of the platform and room for a ramp, if required, should be recorded together.

For new construction, these inputs should be supplied before adjacent building decisions are final. For an existing entrance, current photos and dimensions are essential. ASPAR provides integration information for its own equipment and is not positioned as a standalone external design bureau.

Who this page is for

• condominium associations and building managers assessing entrance accessibility;
• owners of commercial and public premises;
• architects and building designers who need inputs for ASPAR equipment;
• developers and general contractors coordinating the installation area and project stages.

The residential complexes and condominium associations solution covers the wider residential workflow without duplicating it here.

1. Who will use the route and which level difference must be overcome.
2. The geometry of stairs, passages, openings and landing zones.
3. Entry and exit directions for the platform.
4. Indoor or outdoor placement and the actual operating conditions.
5. Available power and the agreed division of preparatory work.
6. The need for enclosures, doors and other elements of the project-specific configuration.

Power supply preparation up to the installation point is usually the customer's responsibility. ASPAR can perform this work under a separate agreement. Site readiness and other preparatory work are defined for the specific property.

1. The customer sends photos, a plan or a drawing and briefly describes the task.
2. ASPAR checks whether the input is sufficient and clarifies constraints.
3. The company selects or develops a solution based on its own equipment.
4. The parties agree the configuration, scope and price.
5. ASPAR manufactures the equipment and completes the agreed delivery, installation, connection, adjustment, testing and commissioning.

Learn more about installation and commissioning. Exact lead times, warranty terms and cost are defined in the agreed documents for each order.

At an entrance in Kyiv, ASPAR manufactured and installed a hydraulic vertical platform together with a folding aluminium ramp. Verified project values are a 250 kg capacity, 550 mm travel and a 1400 x 1100 mm platform. View the case and first-party photos. This is one project configuration, not a universal specification.

• the property address or district, without publishing private data on the website;
• photos of the entire route and both landing zones;
• the level difference or floor elevations;
• the width and layout of the stairs if an inclined platform is being considered;
• available dimensions and preferred entry directions;
• a plan, section or drawing if available;
• information about the installation location and available power.

If some information is missing, ASPAR will identify what is required before a technical solution can be prepared.

• How to choose a lift for people with disabilities
• What architects and building designers should consider
• ASPAR lift platform certification and its scope

Certification supports a defined equipment category within its verified scope. It does not automatically establish that the entire building complies with all applicable requirements.

Can the Kyiv case configuration be reused at another entrance?

Not without a new assessment. The 250 kg capacity, 550 mm travel and 1400 x 1100 mm platform apply to that project only.

When should ASPAR join a new-build project?

Before the location, landing zones and adjacent structures are final, so the equipment inputs can be checked.

Is a completed drawing required?

No. Photos and key dimensions are enough for an initial review. An available drawing helps refine the solution.

Send photos, a plan or a short task description. ASPAR will review the inputs and propose the next technical step. Send the project data for assessment or call +38 066 307 58 87.