|
Quantity
|
Total
|
||
|
|
|||
The ASPAR inclined platform is designed for moving a wheelchair user along a straight stair flight. The platform has electric-drive automatic folding and a stainless-steel execution. It has a load capacity of up to 200 kg. Travel distance along the incline of the stair flight: 6 m and more, based on site parameters; the vertical level difference is measured separately.
Certification. Voluntary certification of serially manufactured ASPAR inclined platform lifts for persons with disabilities is documented by certificate UA.PN.191.4073-26 (27 October 2026 to 26 October 2027). Applicability to the selected configuration and the accompanying documents are confirmed when the order is agreed. Documents and certification scope.
Technical specifications and configuration
Specifications of this inclined platform. Travel distance along the stairs is not the vertical lifting height. Equipment and suitability for your route are agreed following a site survey.
Key specifications
| Rated load | Up to 200 kg |
|---|---|
| Inclined travel distance | 6 m and more, according to site requirements |
| Vertical rise | Determined by the stair-flight geometry; measured separately |
| Platform dimensions | Based on measurements and the agreed configuration |
Controls and construction
| Platform folding | Automatic, electrically powered |
|---|---|
| Input power | 220 V |
| Control circuit | 24 V |
| Passage with platform folded | Checked against stair width and equipment location |
| Material | Stainless steel |
Installation and agreement
| Travel path | Inclined along a straight stair flight |
|---|---|
| Turns and changes of direction | Require a separate site survey; compatibility of this configuration must not be assumed |
| Entry and exit landings | Based on site measurements and the user’s route |
| Mounting | According to the condition and construction of supporting surfaces |
| Custom configuration | Geometry, equipment and installation conditions agreed for the site |
| Warranty | From 1 year; terms defined for the project |
When to consider this model
The model is considered for straight stair flights where automatic platform folding and a stainless-steel execution are required. Suitability for the specific operating conditions, travel path, fixings, landings and safety clearances is determined for the specific site.
What to provide for calculation
photos and measurements of the stairs; length, width, angle and level difference; landing dimensions; fixing conditions; available power supply; operating conditions.
Related solutions and next step
For application context, see the implementation example, solutions for architects and designers and solutions for schools and kindergartens. Conditions for installation and commissioning are agreed for the specific site. The main criteria are summarised in the accessible-lift selection guidance. Send the input data through the contact page to select the configuration.
For site context, see shelter access solutions and hospital visitor accessibility solutions. This model’s configuration must be checked against the straight stair flight, landings and operating conditions. Other variants are listed in the inclined platform lift category.
ASPAR paired solution based on inclined platform lifts. The video shows a paired solution based on inclined platforms. Two platforms are not the standard configuration of a conventional inclined platform lift. The video is an operating example from this equipment series. It does not confirm the capacity, travel height, dimensions or configuration of this model; these are agreed for each order.
The video shows an ASPAR paired inclined platform. It illustrates a separate paired system and does not imply that this model is paired or has the same configuration. Specifications and configuration are agreed for each site.