|
Quantity
|
Total
|
||
|
|
|||
ASPAR EMS 3000-90 is a chain-driven electromechanical vertical lift platform for barrier-free access with a lifting height of up to 3 m, a load capacity of 250 kg and 90° side entry. To check suitability, ASPAR needs the height difference, landing dimensions, entry direction and installation conditions.
Model specifications
| Load capacity | 250 kg |
|---|---|
| Maximum lifting height | up to 3 m |
| Platform size | up to 1400 × 1100 mm |
| Drive type | chain-driven (electromechanical) |
| Power supply | 220 V / 380 V |
| Control voltage | 24 V (low-voltage) |
The listed values apply to model EMS 3000-90. Site- or configuration-dependent parameters are selected for the specific installation.
When to consider this model
EMS 3000-90 should be considered when the task requires vertical travel, 90° side entry and lifting height up to 3 m. The choice between cable-driven, chain-driven, hydraulic or inclined equipment depends on entrance geometry, available space, usage intensity and installation conditions.
What to provide for calculation
- height difference and number of levels;
- dimensions of the lower and upper landings;
- required entry and exit direction;
- photos, measurements or a plan of the installation area;
- indoor or outdoor conditions and the available power supply.
What affects the calculation
The configuration and cost are determined after the input data have been checked. The calculation depends on lifting height, platform size, entry direction, installation conditions, required execution and the agreed scope of work. The price depends on the selected configuration, installation conditions and agreed scope of work.
Experience, selection and support
An implemented entrance solution shows an example of a solution for an entrance area. Selection of EMS 3000-90 takes account of the parameters of the specific site. For selection, use the practical guide and the comparison of related solutions. If required, ASPAR can agree installation work for the specific site.
Documents for this category are collected in the certification and conformity section. Conformity of a solution for a specific site is determined with its installation conditions taken into account.
Frequently asked questions
How does straight-through entry differ from side entry?
With straight-through entry, movement onto and off the platform follows one axis. A 90° side entry is used when the landing geometry requires a change in travel direction.
Is the model name sufficient for an accurate calculation?
No. The installation-area dimensions, height difference, entry direction, operating conditions and agreed configuration are required.
Next step
Send the input data and photos of the installation area. ASPAR will check the suitability of EMS 3000-90 and prepare a configuration for calculation.