|
Quantity
|
Total
|
||
|
|
|||
ASPAR EMT 1000-90 is a cable-driven electromechanical vertical lift platform for barrier-free access with a lifting height of up to 1 m, a load capacity of 250 kg and 90° side entry. For selection, ASPAR needs the height difference, landing dimensions, entry direction and installation conditions.
Technical specifications
| Load capacity | 250 kg |
|---|---|
| Maximum lifting height | up to 1 m |
| Platform size | up to 1400 × 1100 mm |
| Mechanism | folding platform |
| Drive type | cable-driven (electromechanical) |
| Power supply | 220 V |
| Travel speed | ~0.10-0.15 m/s |
| Minimum threshold height | from 50 mm |
The listed values apply to model EMT 1000-90. Site- or configuration-dependent parameters are determined for the specific installation.
When to consider this model
EMT 1000-90 should be considered when the task requires vertical travel, 90° side entry and a lifting height of up to 1 m. The choice between cable-driven, chain-driven, hydraulic or inclined equipment depends on entrance geometry, available space, usage intensity and installation conditions.
What to provide for calculation
- height difference and number of levels;
- dimensions of the lower and upper landings;
- required entry and exit direction;
- photos, measurements or a plan of the installation area;
- indoor or outdoor conditions and the available power supply.
What affects the calculation
The cost is determined from the lifting height, platform size, entry direction, installation conditions, required execution and scope of work.
Experience, selection and support
For an example of an entrance solution, see the implemented solution. For selection, use the practical guide and the comparison of related solutions. If required, ASPAR can agree installation work for the specific site.
Documents on certification and conformity are available in a separate section.
Frequently asked questions
How does straight-through entry differ from side entry?
With straight-through entry, movement onto and off the platform follows one axis. A 90° side entry is used when the landing geometry requires a change in travel direction.
Is the model name sufficient for an accurate calculation?
No. The installation-area dimensions, height difference, entry direction, operating conditions and agreed configuration are required.
Next step
Send the input data and photos of the installation area. ASPAR will prepare a configuration for calculation.