|
Quantity
|
Total
|
||
|
|
|||
Compare other scissor lift tables and solutions for production facilities. To choose an equipment type, read the comparison of goods lifts and scissor tables.
Specifications and configuration options
Parameters of this scissor lift table. Other dimensions, options and compatible combinations are agreed after checking the load, duty cycle and installation site. Maximum values cannot automatically be combined.
Load and dimensions
| Load capacity | 1000 kg |
|---|---|
| Load type | Uniform / permissible center shift |
| Maximum lifting height | up to 3m |
| Minimum height | 0.35–0.50 m |
| Platform dimensions | from 2000 × 1500 mm |
Drive and installation
| Mechanism type | Double scissor (2 pairs of scissors) |
|---|---|
| Drive type | Hydraulic |
| Power supply | 380V |
| Motor power | 2.2–4.0 kW |
| Installation type | Surface-mounted / in pit |
| Finish | Powder coating (RAL 7045 + signal elements) |
Selection and order requirements
| Custom dimensions | Platform dimensions and closed height are agreed for the load and installation site. |
|---|---|
| Duty cycle | Operating frequency and conditions are defined in the technical brief. |
| Installation requirements | Site measurements, photos and available power supply details are required. |
| Warranty | From 1 year. Terms depend on the project. |
The ASPAR double-scissor hydraulic lift table has a load capacity of 1000 kg and is designed for lifting loads and creating a work area up to 3m in standard configuration.
The double scissor system provides an extended lifting range compared to single-scissor models while maintaining stability and structural rigidity.
Standard platform - from 2000×1500 mm.
Platform dimensions can be adjusted both smaller and larger according to technical specifications. Increasing the platform length can achieve even greater lifting height by modifying the scissor mechanism geometry.
Maximum lifting height is determined by engineering calculation depending on:
• platform length
• scissor opening angle
• type of hydraulic cylinder
• operating conditions
Advantages:
• lifting height up to 3m in standard configuration
• two pairs of scissors - increased working stroke
• platform from 2000×1500 mm
• ability to increase height by changing geometry
• engineering adaptation for specific conditions
Structural options:
• change of platform length and width
• reinforcement for point or offset loads
• increased scissor opening angle
• extended hydraulic cylinder
• synchronized hydraulic system
• additional stiffening ribs
• anchor frame for pit installation
Guarding:
• perimeter fencing of the platform
• fencing with gate
• protective edges
• safety chains
• lifting lock when doors are open
• self-closing doors
Caged version:
• metal frame (cage) around the platform
• mesh or solid panels
• full enclosure for the lifting height
• shaft version
• doors with electromechanical lock
• can be used as a personnel work platform
Safety:
• anti-pinch photo sensors
• protective curtains
• mechanical service stops
• emergency manual lowering
• overload limiter
• tilt sensors
Control and automation:
• remote control panel
• stationary control stand
• frequency control
• PLC integration
• signal indicators
• industrial control cabinet
Special versions:
• stainless steel version
• anti-corrosion coating
• low-temperature version
• aggressive environment version
The video is an example of the product series in operation. It does not confirm the load capacity, dimensions or configuration of this specific model. The parameters and configuration are agreed for each order.